Effect of compaction load on crystalline characteristics and surface morphology of commercial NASICON (Na₃Zr₂Si₂PO₁₂) pellets
Year: 2026
Type: article
Abstract: Na₃Zr₂Si₂PO₁₂ (NZSP) is a NASICON-type sodium superionic conductor whose final characteristics are influenced by composition, sintering, and green-body formation. This study evaluates the effect of compaction load on the crystalline characteristics, apparent crystallite size, geometric density, surface morphology, and elemental composition of pellets prepared from commercial NZSP powder. Commercial NZSP powder was uniaxially compacted into 16 mm-diameter pellets at nominal compaction pressures of approximately 146.3, 195.1, and 243.9 MPa. All pellets were sintered at 1100 °C for 12 h. X-ray diffraction (XRD) showed that monoclinic NZSP remained the dominant phase in all samples, while reflections potentially associated with monoclinic ZrO₂ were observed in N4T and N5T. The average apparent crystallite sizes of N3T, N4T, and N5T were 51.96 ± 13.70, 37.84 ± 23.43, and 50.30 ± 23.72 nm, respectively, with no monotonic trend with increasing compaction load. N5T exhibited the highest green and post-sintering geometric densities, 2.185 ± 0.023 and 2.286 ± 0.025 g cm⁻³, respectively, whereas volumetric shrinkage varied only slightly among the samples (6.50–6.81%). SEM observations indicated granular and agglomerated surface features in all three specimens, with differences in the local distribution of surface features and inter-feature gaps; N5T showed comparatively more uniform granular coverage in the examined regions. EDX detected O, Na, Si, P, and Zr in all analyzed regions. Within the investigated pressure range, the 243.9 MPa condition produced the highest measured geometric density while retaining the dominant monoclinic NZSP phase, indicating that the forming condition influences pellet packing and surface characteristics under identical sintering conditions.
Institution: Institut Teknologi Sepuluh Nopember
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,590
OpenAlex ID: W7235290816
