Interaction of atomic hydrogen with native oxides on Fe and Fe-Cr alloys: Disentangling hydrogen-reduction from re-oxidation effects
Year: 2026
Type: article
Abstract: Native oxides on passive steel surfaces not only serve as an effective barrier against corrosion but may also impede the entry of hydrogen into the workpiece, mitigating H-embrittlement. These beneficial barrier properties may be compromised by the interaction of the oxide with diffusional atomic hydrogen. Distinguishing H-induced reduction from competing re-oxidation remains challenging. In this work, native oxides on Fe and Fe-18Cr were investigated by X-ray Photoelectron Spectroscopy (XPS) following backside electrochemical H-charging in air and under air-free conditions. Atomic-H induces the reduction of Fe 3 + to Fe 2 + , progressively transforming Fe 2 O 3 into Fe 3 O 4 , FeO and water. Under air-free conditions, the Fe 2 O 3 fraction decreases from 61% to 2% on Fe and from 22% to approximately 0% on Fe-18Cr. In air, re-oxidation and oxyhydroxide formation partially counteract reduction: Fe 2 O 3 decreases from 59% to 14% on Fe and from 39% to 5% on Fe-18Cr, while FeO(OH) increases from 3% to 18% and from 0.2% to 4.8%, respectively. The interfacial Cr 2 O 3 -rich layer on Fe-18Cr remains largely unaffected by atomic-H but does not prevent hydrogen from reaching and reducing iron oxides. These findings clarify the competing hydrogen-driven reduction and oxygen-assisted re-oxidation mechanisms governing native oxide chemistry, with implications for hydrogen sensing, corrosion and embrittlement.
Source: Applied Surface Science
Institutions: University of Zurich, Empa
Language: English
Subfield: Metals and Alloys
Field: Materials Science
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,930
OpenAlex ID: W7235321853
