Work

Theoretical Investigation of Electromagnetic Wave Propagation and Dispersion Characteristics in Carbon Nanotube-Based Metamaterials

Year: 2026
Type: article
Abstract: Theoretical Investigation of Electromagnetic Wave Propagation and Dispersion Characteristics in Carbon Nanotube-Based Metamaterials Dr. Ravi Kumar* A present study was “Theoretical Investigation of Electromagnetic Wave Propagation and Dispersion Characteristics in Carbon Nanotube-Based Metamaterials” Carbon nanotube (CNT)-based metamaterials have attracted considerable attention because their electrical conductivity, high aspect ratio, nanoscale dimensions, and frequency-dependent electromagnetic response provide opportunities for engineering electromagnetic-wave propagation. This study presents a theoretical investigation of electromagnetic-wave propagation and dispersion characteristics in a CNT-based dielectric metamaterial. A frequency-dependent Drude-type constitutive model is combined with an effective-medium formulation to determine the complex effective permittivity of the composite. The effective refractive index, propagation constant, phase velocity, group velocity, wavelength, attenuation coefficient, and propagation length are subsequently evaluated. A representative terahertz-frequency model is considered for CNT volume fractions ranging from 0 to 10%. The theoretical framework predicts that increasing CNT concentration progressively modifies the effective dielectric response and enhances frequency dispersion. The strongest changes are expected in the vicinity of the characteristic resonance/plasma region, where the real and imaginary components of the effective permittivity vary rapidly. Increased CNT concentration also introduces stronger electromagnetic attenuation because of the conductive loss associated with the nanotube phase. The results demonstrate that CNT concentration, frequency, aspect ratio, and orientation provide important parameters for controlling electromagnetic propagation. The proposed analytical framework can be used as a preliminary design tool for CNT-based absorbers, electromagnetic-shielding materials, tunable waveguides, sensors, antennas, and terahertz devices. The study also identifies the limitations of simple isotropic effective-medium theory and recommends anisotropic modeling, full-wave simulation, and experimental S-parameter measurements for future validation. *Assistant Professor, Department of Physics, Government Engineering College, Arwal, Email [email protected] , Mobile -9801667018
Language: English
Open Access status: green
OpenAlex ID: W7235399432
FWCI:
Cites:
Cited by:
Related to: 10