Suitability of X-ray densitometry for assessing density profiles in chemically modified wood
Year: 2026
Type: article
Abstract: X-ray densitometry was evaluated for its suitability to characterize density profiles in chemically modified wood, using sorbitol–citric acid (SorCA)-modified Scots pine sapwood as a model material. Gravimetric layer-by-layer profiling served as the reference method. The influence of sample orientation on X-ray density profiles and the effect of density heterogeneity in more than one anatomical direction were investigated. In unmodified reference samples, the two methods gave comparable results. In modified samples, X-ray densitometry reliably captured the general shape of density profiles and appears suitable for assessing the spatial distribution of chemical loading across the cross-section. However, systematic deviations were observed: density was underestimated in high-density surface zones and overestimated in the low-density core zone. Expressed relative to the density increase due to modification, differences in the core zone were considerable. X-ray density profiles therefore do not allow direct conclusions on local chemical loading. An additional density gradient perpendicular to the profiling direction caused X-ray profiles to vary with sample orientation in the densitometer. Removing this gradient by additional sample preparation reduced this variation but did not improve agreement with the gravimetric reference; this preparation step is therefore not required.
Source: Wood Science and Technology
Institution: University of Göttingen
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,990
OpenAlex ID: W7235407766
