Tolerance-forward-mapping-based multi-body system kinematic error prediction model for five-axis machine tools
Year: 2026
Type: article
Abstract: Improved accuracy of five-axis machines is vital, and one way to achieve this is by optimizing tolerances for important components. It is well known that there are no quantitative models based on which design tolerances can directly be correlated with machining errors. The result is often trial-and-error and manual adjustments. It is therefore hard to predict and control accuracy. To address this problem, the authors propose a tolerance-forward-mapping-based multi-body system (MBS) kinematic error prediction model (TFM-MBS) and test its effectiveness experimentally. First, a Fourier series superposition is used to map the tolerance parameters of the key parts with geometric errors. The periodicity of the errors is reflected in the data; using MBS and homogeneous transformation matrix (HTM) integration of the geometric error volumetric model and an ideal S-shaped path, a complete error prediction model is proposed. Experiments were performed under one cutting condition, and predicted and measured errors were obtained in the workpiece's four sections. The average predicted contour error in these sections was 0.0450, 0.0448, 0.0446, and 0.0455 mm, respectively, while the measured contour error was 0.0475, 0.0472, 0.0474, and 0.0477 mm. All deviations were within 6 % of the preliminary verification of the model in geometric-error-dominated conditions. The model provides a theoretical basis for quantitative optimization of machine-tool tolerance design but does not take into account nonlinear factors such as thermal deformation, vibration, of force-induced deformation.
Source: Mechanical sciences
Institution: Beijing University of Technology
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $765
Awards: G2127589594, G2443613098
OpenAlex ID: W7235574179
