Work

Reference-Point-Dependent turning radii: A low-cost laboratory activity using an asymmetric two-wheel system

Year: 2026
Type: article
Abstract: Rolling motion integrates translational and rotational motion, rolling constraints, and rigid-body kinematics, yet undergraduate laboratory activities rarely allow multiple reference-point trajectories to be compared within the same rolling system. This study develops and mechanically validates a low-cost asymmetric two-wheel apparatus for investigating the turning radii of the inner wheel, outer wheel, axle midpoint, and centre of mass. A unified kinematic formulation defines these radii in the horizontal rolling plane while accounting for the projected axle length and the mass-dependent centre-of-mass position. Seven apparatus configurations were tested in five repeated releases each (35 trials). The four trajectory diameters were determined independently from floor-referenced physical measurements, yielding 140 experimental radius measurements. No inner-wheel, axle-midpoint, or centre-of-mass radius was reconstructed from the measured outer-wheel trajectory. Mean percentage errors were 4.40%, 3.39%, 1.64%, and 2.76% for the inner wheel, axle midpoint, centre of mass, and outer wheel, respectively, with relative standard deviations below 1.7%. The independently determined wheel trajectories also verified R 2 − R 1 = L c o s θ , with discrepancies below 0.65% for all configurations. Constructed from inexpensive cardboard wheels and a wooden-skewer axle, the apparatus provides an accessible and reproducible platform for investigating reference-point-dependent rolling kinematics. A classroom implementation framework is proposed, while learning effectiveness remains to be evaluated separately.
Language: English
Subfield: Education
Open Access status: bronze
OpenAlex ID: W7235602494
FWCI:
Cites: 15
Cited by:
Related to: 10