Comparative seismic evaluation of RC column jacketing and CFRP wrapping for an existing low-rise RC building in Nepal
Year: 2026
Type: preprint
Abstract: Much of the reinforced concrete (RC) building stock of Nepal was built without seismic detailing or reliable control of concrete quality, and replacing it is not realistic. Two retrofit schemes were therefore applied to the same deficient building, so that performance and cost could be judged on the same basis. A four-storey (G + 3) residential RC frame in Lalitpur was surveyed, rebound-hammer tested and modelled in ETABS. The mean in-situ strength of about 14.9 MPa gave M15 concrete with Fe415 reinforcement in the as-built model. Under equivalent static seismic loading, sixteen columns failed the axial-flexure check and the ratio of maximum to minimum storey displacement reached 3.13, against a torsional irregularity limit of 1.5. The schemes were RC jacketing of those columns from 230 × 230 to 430 × 430 mm with M25 concrete and a new Fe500 cage, and single-ply carbon fibre reinforced polymer (CFRP) confinement. Jacketing took the axial capacity of the reference column from 377.5 to 2514.4 kN, multiplied storey stiffness by three to five, cut the maximum roof displacement by 75% and brought every torsional irregularity ratio below 1.5. CFRP took the same capacity to 817.8 kN and cleared the member-level deficiency, but storey stiffness stayed within about 1% of the as-built value, so displacement, drift and torsional response barely moved. At indicative 2026 Kathmandu rates CFRP cost NPR 437,169 against NPR 823,923 for jacketing. Only jacketing satisfies every code check on this building, though CFRP remains attractive where added mass or occupant disruption governs.
Source: Research Square
Institution: Kathmandu University
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7235613220
