Work

An 868/915 MHz Transmitter in 90 nm BCD Technology for Embedded Wireless Communication in Smart-Power ICs

Year: 2026
Type: article
Abstract: This paper presents a dual-band sub-GHz transmitter in a 90 nm BCD technology proposing circuit solutions that enable wireless connectivity in a non-RF platform. The proposed device is meant to be a first demonstrator of a monolithic I/Q RF front-end to be embedded in smart-power ICs. It includes a 2 GHz voltage-controlled oscillator (VCO) exploiting a complementary cross-coupled LC-tank topology with a digitally controlled capacitor bank for coarse tuning and an NMOS varactor for fine tuning to achieve wide tuning range while simultaneously limiting the VCO frequency gain for an optimized trade-off between phase noise performance and current consumption. The VCO drives a divide-by-two stage, which simultaneously provides I/Q signals and the RF carrier for the output buffer. It exhibits a tuning range spanning from 1.63 GHz to 1.98 GHz, which allows covering both EU and US ISM bands at 868 MHz and 915 MHz, respectively, and draws 2 mA from the 1.2 V supply voltage. The measured phase noise performance is as low as −110 dBc/Hz and −111 dBc/Hz at 1 MHz offset from the 1.74 GHz and 1.83 GHz oscillation frequencies, respectively. After the divide-by-two operation the phase noise of the corresponding transmitted carrier scales down to −116 dBc/Hz and −117 dBc/Hz at 1 MHz frequency offset from 868 MHz and 915 MHz, respectively. The RF buffer delivers through an external matching network of 3.6 dBm of output power to the 50 Ω antenna, enabling short-range wireless connectivity in smart-power platforms with a low-cost implementation.
Source: Electronics
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7235723469
FWCI:
Cites: 14
Cited by:
Related to: 10