Work

Orientation of flat fibers in injection molding: a two-tensor Folgar–Tucker model, fitted closures, and properties for warpage simulation

Year: 2026
Type: preprint
Abstract: Flat (ribbon-like) glass fibers, such as 28 × 7 µm E-glass, are used in injection-molded thermoplastics to raise transverse stiffness and lower warpage, but orientation models and the micromechanics in molding simulation assume axisymmetric fibers. We generalize the Folgar–Tucker model to triaxial particles. Single fibers are described by unit quaternions obeying the triaxial Jeffery equation. Because the orientation space is S³/Q₈, the quaternion second moment carries no information, and the macroscopic state consists of two second-order tensors: A for the length axis and C for the normal of the flat face. The moment equations are exact in the rotary-diffusion term, also for anisotropic diffusion in the particle frame, and need a closure only for three mixed fourth-order moments. A frame-indifferent closure with 57 basis tensors, whose coefficients depend on the invariants and on two shape parameters, is fitted to 2,156 quaternion Monte Carlo runs and covers rods, ribbons and disks with 2–4% flow-term error. At weak rotary diffusion a blend with a decoupled closure gives the most accurate trajectories. Mori–Tanaka homogenization with the triaxial Eshelby tensor, together with an orientation average that is exact in the same moments, predicts 9–16% higher cross-flow stiffness and a 19% smaller in-plane thermal-expansion anisotropy than round fibers of equal cross-section. To use the model in a commercial code that accepts only one orientation tensor, we identify that code's property model from published descriptions and its outputs to within 1.1%, and pass a fitted effective tensor A_eff. This reproduces the flat-fiber warpage driver (median error −0.5 µm/m/K instead of +7.7 µm/m/K) and predicts about 30% lower shrinkage anisotropy for a center-gated disk and 5% lower warpage for a tray in a linear analysis; past buckling, a large-deflection analysis amplifies this to 17%. Main contributions Two-tensor (A, C) orientation model for flat fibers, derived from quaternion kinematics on SO(3). Closure fitted to Monte Carlo data across a family of shapes, valid for rods, ribbons and disks. Thermoelastic properties of flat-fiber composites from Mori–Tanaka homogenization with the triaxial Eshelby tensor. Coupling to a commercial 3D molding solver through a solver plugin and a fitted effective orientation tensor. About this preprint. 37 pages, 7 figures, 11 tables. Conference abstracts based on this work were submitted on 28 October 2026 to NUMIFORM 2027 (Kyoto, submission No. 052) and PPS-42 (Chengdu, reference 26). The code, fitted closures and calibration data are available from the author on reasonable request. Autodesk and Moldflow are registered trademarks or trademarks of Autodesk, Inc. This work is not affiliated with or endorsed by Autodesk, Inc.
Language: English
Open Access status: green
OpenAlex ID: W7235733980
Cites:
Cited by:
Related to: 10