Work

Influence of Fluorescent and Phosphorescent Pigments on the Optical, Thermal, and Morphological Characteristics of PP/HDPE Blends

Year: 2026
Type: article
Abstract: Luminescent additives can provide optical functionality to polyolefin blends, but their effects on the host polymer’s thermal and morphological characteristics require careful evaluation. Here, polypropylene (PP)/high-density polyethylene (HDPE) blends with HDPE/PP ratios of 70/30, 50/50, and 30/70 were prepared by melt compounding with either fluorescent (FL) or phosphorescent (PH) pigment at a fixed loading of 10 wt%. Fluorescence spectroscopy of solvent-treated composite filtrates revealed pigment- and solvent-dependent emission profiles, including a prominent band near 535 nm for the FL-containing xylene filtrate. These spectra characterize the filtrates rather than the intrinsic emission of the solid composites. Differential scanning calorimetry showed distinct HDPE and PP melting transitions at approximately 135–138 °C and 164–168 °C, respectively, with limited shifts after pigment addition but composition-dependent changes in calculated crystallinity. For HDPE50/PP50, HDPE crystallinity increased from 60.40% to 74.04% (PH) and 70.09% (FL), whereas PP crystallinity decreased from 21.46% to 19.85% and 12.70%, respectively. Thermogravimetric analysis indicated predominantly single-stage degradation, with maximum degradation temperatures around 490–497 °C across the formulations. FT-IR and X-ray diffraction showed no readily detectable changes in the characteristic absorption bands or principal diffraction features of the polymer matrix, while scanning electron microscopy revealed pigment-dependent differences in local fracture-surface morphology. Overall, the findings show that the two pigment systems produce different crystallinity and surface-morphology responses despite largely retained melting and degradation profiles. This comparative assessment provides a basis for further development of luminescent PP/HDPE materials, although direct solid-state optical measurements and durability testing remain necessary for application-specific evaluation.
Language: English
Open Access status: gold
Estimated APC paid: $2,000
OpenAlex ID: W7235803209
FWCI:
Cites: 34
Cited by:
Related to: 10