Rock fabric controls tensile strength anisotropy and fracture evolution in foliated metamorphic rocks
Year: 2026
Type: article
Abstract: Brazilian tensile strength (BTS) test is widely used approach for measurement of tensile strength of rocks. The tensile behavior of foliated rocks is strongly influenced by the orientation of foliation and anisotropic fabrics causing anisotropy in strength. The anisotropy development in BTS is combined effects of mineralogical fabric, fracture evolution, and stress redistribution, which is insufficiently understood yet. This study investigated the complex relationship between anisotropic fabric orientation and the tensile behavior of metamorphic rocks having fabric and texture variation; fine-grained slate, medium-grained metasandstone, and coarse-grained banded gneiss. The research demonstrated anisotropy under BTS along with failure mechanisms, fracture geometry, and stress redistribution during loading. The slate exhibited the strongest anisotropy (BAI = 2.29), followed by banded gneiss (BAI = 1.49) showing minimum failure strength near β = 20° for both rocks, and metasandstone (BAI = 1.38) exhibited the weakest response at β = 80°. The maximum strength was developed at β = 90°, 40°, and 60°-70° for slate, metasandstone, and banded gneiss, respectively. The result signifies that the weakest loading orientation is controlled by rock fabric rather than a universal anisotropy angle. The fracture observations disclosed a systematic transition from parallel to foliation (PF) to across the foliation (AF) failure at transition angles of approximately 20-30° for slate and banded gneiss and 10-20° for metasandstone. Stress analysis showed that the increasing anisotropy promoted a shift from pure tensile failure to mixed compression-shear failure due to the stress redistribution. Moreover, a strong positive correlation was found between BTS and total fracture length having R 2 from 0.71 to 0.86. These observations signify that the fracture development is closely associated with energy dissipation during failure. The findings indicate that the continuity and mineralogical contrast of anisotropic fabrics are more influential in governing tensile anisotropy than the frequency of bands alone.
Source: Solid Earth Sciences
Language: English
Topic: Rock Mechanics and Modeling
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,410
OpenAlex ID: W7235849714
