Techno-Economic and Life Cycle Assessment of Hybrid Hollow-Fiber Membrane Contactor Configurations for Postcombustion CO2 Capture Integrated into Power Generation
Year: 2026
Type: article
Abstract: This study evaluates two hybrid postcombustion CO2 capture configurations and benchmarks them against a net 1000 MW supercritical coal-fired power plant without carbon capture. Case 2 integrates HFMC-based absorption with thermal regeneration in Mellapak structured packing, while case 3 combines Mellapak absorption with vacuum-assisted HFMC regeneration. Detailed absorber and desorber models were developed in MATLAB/Simulink and coupled in Aspen Plus full-plant flowsheets to ensure consistent mass and energy balances, achieving a 90% capture rate. Among the captured assessed systems, case 3 shows the best technical performance, reaching an electrical efficiency of 35.35% and reducing SPECCA to 2.17 MJ/kg CO2, compared with 3.77 MJ/kg CO2 for case 2. Economically, case 3 also provides the lowest levelized cost of electricity, 100.33 €/MWh, and CO2 avoidance cost, 57.50 €/t CO2. The cradle-to-gate Life Cycle Assessment indicates an approximately 74% reduction in global warming potential, although increases occur in other impact categories when competed with the benchmark noncapture configuration, highlighting the trade-offs associated with deep decarbonization. Overall, the results demonstrate that membrane-based regeneration strategies can significantly enhance energy efficiency, together with economic and environmental performance of postcombustion CO2 capture.
Institution: Babeș-Bolyai University
Language: English
Subfield: Filtration and Separation
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $4,500
Awards: G2592659871, G2911162019
OpenAlex ID: W7235855691
