Setting the Sensible and Latent Performance of Air-to-Air Plate Heat Exchangers at the Manufacturing Stage by Multi-Nozzle 3D Printing
Year: 2026
Type: article
Abstract: Heat recovery ventilation requires exchangers whose sensible and latent performance can be matched to the climate, yet in membrane cores the latent performance is fixed before assembly and the plate geometry is limited by the membrane. This study presents a new manufacturing method in which a ten-nozzle multi-extruder prints a counterflow plate core by Fused Deposition Modeling in one process and, unlike in existing cores, the wall material and the nozzle temperature set the latent transfer independently of the channel geometry. Five cores of identical geometry were tested at 150 m3/h in a modified air handling unit at outdoor temperatures of 7.2–8.9 °C: a PETG core as a sensible-only reference and four foaming PLA cores printed at nozzle temperatures of 200–230 °C. The supply-side temperature ratio ηθ,su remained between 81.4% and 84.0%, whereas the moisture ratio ηx,su rose from 0.0% for PETG to 28.0% at 220 °C and fell to 18.0% at 230 °C, where the cellular wall structure collapsed. The nozzle temperature is thus a manufacturing parameter that adjusts the latent performance of a printed core without changing its geometry.
Source: Energies
DOI: 10.3390/en19225568
Authors: Pawel Znaczko(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Project administration, Resources, Software, Validation, Visualization, Writing – original draft, Writing – review & editing), Kazimierz Kaminski(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Project administration, Resources, Software, Validation, Visualization, Writing – original draft, Writing – review & editing), Norbert Chamier-Gliszczynski(Conceptualization, Formal analysis, Funding acquisition, Project administration, Resources, Supervision, Validation, Writing – review & editing)
Institution: Koszalin University of Technology
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7235856535
