Work

Effect of Drop Height on Ground Deposition Distribution in Helicopter Bucket Firefighting: A Full- Scale Experimental Study

Year: 2026
Type: preprint
Abstract: Drop height is one of the few operational parameters that pilots can directly control during helicopter bucket drops, yet quantitative field evidence on its influence on ground deposition remains limited. Full-scale drop tests were conducted using an AS350B3 helicopter equipped with a 750 L bucket at heights of 15, 20, and 25 m, with flight speed fixed at 38 kn (approximately 70 km/h). Areal water application was measured gravimetrically using a 51 × 7 sampling grid (357 points). As drop height increased from 15 to 25 m, peak application decreased monotonically from 4.41 to 2.44 L/m² (44.7%), with a larger reduction over 15–20 m (35.8%) than over 20–25 m (13.9%). The deposition centroid shifted 8.5 m downstream, and lateral dispersion increased from 0.78 to 0.95 m. In contrast, longitudinal coverage length (132–141 m) and effective coverage area (1260–1323 m²) varied by less than 7%, indicating that drop height primarily controls deposition intensity and lateral spreading, whereas longitudinal extent is governed mainly by flight speed and release duration. The 20 m case produced the highest mean application over the wetted area (0.93 L/m²), the lowest peak-to-mean ratio (3.06), and the highest recovered-water fraction (41.1%), suggesting the best balance between uniformity and water-use efficiency. Relative to a target coverage range of 0.5–3.0 L/m², operational heights of 15–18 m, approximately 20 m, and 23–25 m are recommended for high-intensity fireline attack, balanced intensity-width objectives, and firebreak/mop-up operations, respectively. Because each condition was tested once, these findings should be validated through replicated trials and fire-behavior experiments.
Language: English
Open Access status: green
OpenAlex ID: W7235868436
Cites:
Cited by:
Related to: 10