Finite Element-Based Design of Experiments for the Optimal Geometry of a Ti6Al4V Hip Implant Stem: Influence of Loading Direction
Year: 2026
Type: article
Abstract: Background/Objectives: Finite element optimization of hip implant stems is usually performed under a single simplified load, often directed along the neck axis. This study asks whether the geometric parameters governing stem stress change with the idealized static loading direction. Methods: A Taguchi L27 array of a parametric Ti6Al4V stem (four geometric parameters, three levels each) was analyzed with quadratic tetrahedral elements under 2300 N applied along the neck axis (Case A) and vertically through the femoral head (Case B). The response was the peak von Mises stress outside the potted region and a 12 mm exclusion region at the tied head–trunnion junction. Contributions were quantified by single-factor analysis of variance (ANOVA). Results: The two loads gave different outcomes. Under neck-axis loading, the peak stress was 74.2–92.8 MPa and neck length explained 100.0% of the variance. Under vertical loading, the peak stress was 218.8–636.8 MPa, neck base radius (58.5%) and neck top radius (29.9%) dominated, and neck length explained 4.7%. The effect of neck length reversed: increasing it from 20 to 30 mm lowered the neck-axis stress by 19.8% but raised the mean vertical stress by 15.4%. The rank correlation between cases was weak (ρ = −0.23). Conclusions: Within this model and these factor ranges, optimizing under neck-axis loading alone fixes only the neck length and leaves the vertical response undetermined. Designs 12, 24, and 9 gave the best compromise between the two loads. Stem geometry should therefore be optimized under both loading directions.
Source: Prosthesis
Authors: Vinyas, Raviraj Shetty(Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Supervision, Visualization, Writing – review & editing), Gururaj Bolar(Funding acquisition, Methodology, Project administration, Supervision, Validation, Visualization), Harishkumar Kamat(Formal analysis, Funding acquisition, Resources), Jonathan Monteiro(Funding acquisition, Investigation, Resources), Supriya J P(Formal analysis, Resources, Writing – review & editing), Amulya Shetty(Conceptualization, Project administration, Writing – review & editing), Adithya Hegde(Formal analysis, Visualization, Writing – review & editing)
Language: English
Subfield: Surgery
Field: Medicine
Domain: Health Sciences
Open Access status: gold
Estimated APC paid: $1,930
OpenAlex ID: W7235899160
