Hybrid System Architecture for Onshore Power Supply with Inductive Power Transfer
Year: 2026
Type: article
Abstract: Onshore Power Supply (OPS) systems are a cornerstone of maritime decarbonization, enabling berthed ships to receive electrical power from the terrestrial grid and eliminate auxiliary diesel generator operation during port stays. This paper proposes a hybrid shore-to-ship (STS) architecture that integrates conventional wired three-phase AC delivery with inductive power transfer (IPT) on a shared DC bus and verifies its operation experimentally at reduced power. The power conversion chain comprises a three-level neutral-point-clamped (3LNPC) active front-end rectifier for DC-bus regulation, a 3LNPC inverter providing 50 Hz or 60 Hz ship-compatible AC output, and a high-frequency H-bridge inverter driving a series-series (SS) compensated IPT resonant stage. A laboratory prototype whose hardware is designed for a rated power of 20 kW, incorporating SiC-based converter modules, FPGA-based digital control, optical-fiber communication links, and a modular backplane architecture, is designed and implemented. In laboratory tests at a nominal 50 V DC bus, supplied by an autotransformer and a diode rectifier, and with both output stages in open loop, the prototype simultaneously delivered about 14–27 W to a three-phase load at 50 Hz and 60 Hz and about 112–122 W across a 30 mm air gap through the SS link switched at 20 kHz, with an estimated IPT efficiency of about 86% with the unregulated bus at about 45 V. These low-power results demonstrate the feasibility of integrating an inductive power path into a shore power infrastructure under a unified DC bus and control platform.
Source: Energies
DOI: 10.3390/en19225574
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7235923669
