Work

A Phase-Adjustable Clock Synchronization Circuit for Reliable Inter-Chip Handshake in Cascaded Automotive TDDI Chips

Year: 2026
Type: article
Abstract: In multi-chip cascaded touch and display driver integration (TDDI) systems, inter-chip clock phase uncertainty can cause cycle-level random timing shifts in the REQ/ACK handshake link, leading to inconsistent touch-control timing among cascaded chips. This paper presents a chip-level cascaded clock synchronization architecture based on three cooperative mechanisms. First, the PLL feedback clock periodically re-synchronizes the AD_CLK divider counters, establishing a fixed phase relationship across cascaded AD_CLK domains sharing a common reference clock. Second, a dual-output phase-adjustable divider with half-cycle resolution provides programmable phase compensation for master and slave clocks. Third, the launch and capture phases in the REQ/ACK link are adjusted to avoid the setup/hold-sensitive region during capture. This converts uncertain inter-chip timing into a configurable, calibratable deterministic relationship. Simulation and fabricated-chip measurement results demonstrate reliable operation from −35 °C to +105 °C. With an AD_CLK period of 55.56 ns, the measured ACK edge-distribution range with respect to REQ is approximately 11.9 ns, and measurements indicate a minimum separation of approximately 14 ns between the ACK edge and the adjacent capture-clock edges. No cycle-level random timing shift was observed under the tested operating conditions. System-level validation confirms stable display-driving and touch-sensing synchronization between master and slave chips. The design has been deployed in mass-produced automotive display products.
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7235932208
FWCI:
Cites: 31
Cited by:
Related to: 10