Mechanical performance and failure analysis of additively manufactured PLA–carbon fibre, PLA–glass fibre, ABS–carbon fibre, and ABS–glass fibre composites
Year: 2026
Type: article
Abstract: The present study investigated the influence of carbon fibre (CF) and glass fibre (GF) reinforcement on the tensile, flexural, and impact properties of FDM-fabricated PLA- and ABS-based composites. Six material systems, namely PLA, CF + PLA, GF + PLA, ABS, CF + ABS, and GF + ABS, were fabricated using a 1.75 mm filament and an FDM process with 100 % infill density, 0 mm air gap, flat (0°) build orientation, and 45° raster angle. Tensile, flexural, and impact tests were conducted according to ASTM D638, ASTM D790, and ASTM D256 standards, respectively. The mechanical performance of the FDM-printed components was significantly impacted by the polymer matrix type, reinforcement type, fibre-matrix interaction, and printing parameters. The fracture surfaces of the fibre-reinforced specimens were further examined using scanning electron microscopy (SEM). Among all the investigated materials, the GF + PLA composites exhibited the highest tensile strength (62.3 MPa), flexural strength (24.6 MPa), and impact strength (88.1 kJ/m 2 ). In addition, the CF + PLA composites showed substantial improvements compared with neat PLA, with tensile, flexural, and impact strengths of 44.8 MPa, 11.2 MPa, and 27.93 kJ/m 2 , respectively. For the ABS, CF + ABS and GF + ABS composites improved tensile strength compared with neat ABS, while the CF + ABS showed better flexural and impact performance than neat ABS. The SEM analysis revealed matrix cracking, fibre pull-out, fibre fracture, matrix deformation, crack deflection, and localized fibre–matrix separation, confirming the involvement of fibre-related load-transfer and fracture mechanisms. Overall, the results demonstrated that the GF + PLA composites provided the most favourable combination of the tensile, flexural, and impact performance under the selected FDM processing conditions.
Source: International Polymer Processing
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $2,712
Funder: Universitas Brawijaya
OpenAlex ID: W7235945636
