Work

Geomechanical Behavior of Filtered Iron Ore Tailings from the ‘Quadrilátero Ferrífero’ (Brazil) for Stack Disposal

Year: 2026
Type: preprint
Abstract: This study seeks to determine the geomechanical behavior of iron ore tailings from the ‘Quadrilátero Ferrífero’, Brazil, in a wide range of stresses. An extensive geotechnical investigation campaign was conducted to obtain the normal compression lines (NCLs) and critical state lines (CSLs) of the material. To this end, oedometric consolidation tests and drained (CID) and undrained (CIU) isotropic triaxial tests were performed with consolidation stresses ranging from 100 to 4500 kPa. Curvilinear behavior was observed for both the NCL and CSL in the e-ln p' plane, mainly under high-stress conditions (p' above 6000 kPa), which is explained by the breakage of sandy particles, predominantly silica (SiO2). To verify the granulometric change in the material, the particle breakage index (B_g) and changes in the grain shape were evaluated by scanning electron microscopy (SEM) tests and image interpretation. Based on these results, a division of the CSL of the tailings in the e-ln p' plane was proposed into ranges with geomechanical behavior of strain hardening and fabric change. In addition, calibrations of the dilatancy parameters (N_tc and χ_tc) of the material were performed, from which fabric effects resulting from the initial void ratios of the samples were observed. Finally, an S-CPTu test was performed on experimental dry stacking, where the relationship between the shear modulus (G_0) and the average effective stress (p’) was calibrated. The values of the geomechanical parameters obtained for the material studied were consistent with the results of other studies on iron ore tailings.
Language: English
Open Access status: green
OpenAlex ID: W7235945995
Cites: 54
Cited by:
Related to: 10