High-Resolution Mesh Refinement, Radial Domain Asymptotics, and Dielectric Interface Diagnostics of a Ten-Shed Polymer Suspension Insulator
Year: 2026
Type: preprint
Abstract: Building upon the baseline radial domain benchmarks established in Paper No. 01 (Khanh Model v1.1), this second study advances the axisymmetric finite-difference (FD) investigation of a 10-shed polymer suspension insulator energized at 19.052559 kV RMS (33 kV three-phase nominal system) to a high- density computational regime (Model v1.5 series). The physical geometry comprises a fibre-reinforced plastic (FRP) core (εr = 7.2), silicone rubber housing and ten sheds (εr = 4.3), metallic end fittings, and surrounding air (εr = 1.0) over a 405 mm insulator length. Using harmonic permittivity averaging at cell faces, the computational grid is refined from h = 2.0 mm down to h = 0.5 mm while expanding the outer radial domain up to Rmax = 400.0 mm, yielding an 801 × 1,291 structured mesh with 1,034,091 total nodes and 5,126,648 nonzero matrix entries. The sparse linear solver achieves a relative algebraic residual of 1.40 × 10−14 with zero boundary voltage error. Extending Rmax from 360.0 mm to 400.0 mm dampens relative variations in peak air, silicone, and FRP electric fields to 0.154%, 0.254%, and 0.257%, respectively. At h = 0.5 mm, peak stresses reach 1.4599 kV/mm in air (r = 20.5 mm, z = 0.0 mm), 0.4975 kV/mm in silicone (r = 18.5 mm, z = 30.5 mm), and 0.3701 kV/mm in FRP (r = 15.0 mm, z = 31.5 mm), reflecting sharp-corner field concentration. Finally, an orientation-aware dielectric interface diagnostic workflow across 2,738 boundary samples demonstrates that excluding points within 3.0 mm of geometric junctions reduces 95th-percentile mismatches along the Silicone–Air boundary from 0.040764 to 0.001290 μC/m2 in normal electric displacement and from 0.004495 to 0.001767 kV/mm in tangential electric field. Keywords: Polymer suspension insulator; mesh refinement; dielectric interface continuity; normal electric displacement; finite-difference method; corner singularity; silicone rubber; FRP.
Author: Nguyễn Kim, Khánh
Institution: University of Khanh Hoa
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7236005383
