Biomechanical performance and posterior exposure demand of a cortical bone trajectory–reverse cortical bone trajectory hybrid construct in transforaminal lumbar interbody fusion under osteoporotic conditions: a finite element analysis
Year: 2026
Type: preprint
Abstract: Background In osteoporotic patients undergoing transforaminal lumbar interbody fusion (TLIF), achieving sufficient segmental stability while reducing posterior surgical exposure remains challenging. This finite element study aimed to evaluate whether a cortical bone trajectory–reverse cortical bone trajectory (CBT–RCBT) hybrid construct could balance fixation stability and posterior exposure requirements in osteoporotic TLIF. Methods A validated three-dimensional finite element (FE) model of the lumbosacral spine (L3–S1) was developed from thin-slice computed tomography data. An L4–L5 TLIF model was created, and three posterior fixation constructs were simulated under both normal and osteoporotic bone conditions: traditional-trajectory pedicle screws (TT–TT), cortical bone trajectory screws (CBT–CBT), and a hybrid construct combining cranially directed CBT with caudally directed reverse CBT (CBT–RCBT). The inferior surface of S1 was fully constrained. A 500-N compressive follower load and a superimposed 10 N·m moment were applied to simulate flexion, extension, lateral bending, and axial rotation. Outcome measures included L4–L5 range of motion (ROM), interbody cage stress, posterior screw–rod peak stress, mean adjacent-disc stress, and normalized posterior exposure area. Results Under osteoporotic conditions, the CBT–RCBT construct yielded lower ROM than TT–TT and CBT–CBT in extension (0.4195°), lateral bending (0.8978°), and axial rotation (0.4268°), whereas flexion ROM was not the lowest (0.8604°). Compared with CBT–CBT, CBT–RCBT reduced peak stress in the screw–rod system by 17.37%–52.77%, with rotational loading decreasing from 302.1203 MPa to 142.6792 MPa. Cage stress under extension, lateral bending, and axial rotation was also reduced (7.8800 vs 8.0800 MPa; 27.3700 vs 29.7250 MPa; 21.8500 vs 24.9350 MPa), while mean adjacent-disc stress showed no consistent increase across constructs. The normalized posterior exposure area was lowest for the CBT–RCBT strategy (TT–TT:CBT–CBT:CBT–RCBT = 1 : 0.6988 : 0.4038). Conclusions In this osteoporotic TLIF finite element model, the CBT–RCBT hybrid construct demonstrated a direction-dependent biomechanical advantage, with improved stability in extension, lateral bending, and axial rotation, lower posterior fixation stress than CBT–CBT, and reduced posterior exposure demand. These findings support further biomechanical and clinical evaluation of CBT–RCBT in osteoporotic TLIF when reduced posterior exposure is desirable.
Source: Research Square
Institutions: Qilu Hospital of Shandong University, Shandong University
Language: English
Subfield: Orthopedics and Sports Medicine
Field: Medicine
Domain: Health Sciences
Open Access status: green
Award: G1317625666
OpenAlex ID: W7236022909
