Work

How Much DC-Link Energy Does Vibration-Free Inertia From a Grid-Forming Wind Turbine Need?

Year: 2026
Type: preprint
Abstract: Preprint of a manuscript submitted to IEEE Transactions on Energy Conversion. The PDF contains the paper (10 pages) and its supplement (6 pages). Code, OpenFAST inputs and results: https://doi.org/10.5281/zenodo.24327563 Grid-forming wind turbines step power at frequency events and phase jumps; a generator torque that follows excites lightly damped modes: shaft modes in geared, blade modes in direct-drive turbines. Shaped torque delivers energy late, which DC-side storage must bridge; we bound it whatever the mode: for one mode of period T_n, at least ΔP·T_n/4 when the torque only rises and ΔP·T_n/6 when it may fall back without modal overshoot, with optimal trajectories, extended to frequency uncertainty and two modes, ΔP/(f1 + f2) for a rising torque. Where quasi-static and modal loads oppose, as outboard on a one-mode blade, shaped torque still takes the load beyond its initial and final values; a linear programme minimizes the buffer for a bounded excursion. OpenFAST residuals agree within 0.02 for 18 shapers on a one-mode blade and within 0.034 on a geared turbine's shaft unless a pitch limit re-excites it. A geometrically exact blade adds a 3.1-Hz mode; a two-mode design reduces both below a tenth, also at 22 MW; robust designs hold residuals near 10% under 10–15% frequency errors, from 9 to 18 m/s and, against a ramp, in turbulence. Measured and converter-model buffers exceed the design by up to 10%. For the IEA 15-MW turbine's firm inertia of 1.12 s, vibration-free delivery needs 20–30 ms of rated power: 81 supercapacitor modules for its 0.9-MW peak. On this direct-drive turbine shaping addresses repeated events, not strength: the unshaped step adds up to 46% to the largest edgewise moment at 88% span but 9% to the blade's largest edgewise strain.
Author: Shen, Yuan
Language: English
Open Access status: green
OpenAlex ID: W7236025978
Cites:
Cited by:
Related to: 10