Influence of ZrO2 nanoparticle incorporation on the mechanical and wear performance of electro-co-deposited Cu-ZrO2 coatings
Year: 2026
Type: article
Abstract: The research paper presents the successful creation of nanocomposite coatings of Cu-ZrO 2 on a metallic substrate by the electro-co-deposition technique. This was achieved by using various concentrations of ZrO 2 (25, 50, 75, and 100 mg/L). The influence of the combination of ZrO 2 on the microstructural, mechanical, tribological, and adhesion properties of coatings was thoroughly studied. Scanning electron microscopy and energy-dispersive spectroscopy were used to examine the surface morphology and elemental composition, and phase analysis was carried out by X-ray diffraction. Grain refinement and surface densification were observed in SEM images with increasing ZrO 2 concentration up to 75 mg/L, while cluster formation in the particles was noted at 100 mg/L. As the ZrO 2 content was increased, the microhardness of the coatings was raised from about 80 HV to 125 HV. The coating with 75 mg/L ZrO 2 had the least amount of wear loss ( ̴ 2.16 mm³) and the greatest adhesion strength ( ̴ 26.8 MPa). The coating with 75 mg/L ZrO 2 proved to have the best combination of properties: hardness, wear resistance, and adhesion strength. The findings showed that the incorporation of ZrO 2 nanoparticles with controlled quantities offers significant improvements in the overall performance of the Cu coatings, which is appropriate for advanced engineering and protective surface applications.
Institutions: Amity University Madhya Pradesh, Parul University
Language: English
Subfield: Surfaces, Coatings and Films
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,590
OpenAlex ID: W7236059072
