Oxygen Anchoring Enabled by Ce‐Based Pyrochlore Coating for Robust Lithium‐Ion Battery Cathodes
Year: 2026
Type: article
Abstract: Nickel‐rich layered oxides (≥ 80% Ni) are pivotal cathode materials for next‐generation high‐energy lithium‐ion batteries. However, under high cutoff voltage, the over‐oxidation of active cations and oxygen anions triggers structural instability and the continuous migration of O n− (0 < n < 2) radicals, rapidly leading to oxygen release, transition metal (TM) dissolution, electrolyte decomposition, and consequently severe degradation of electrochemical performance. Herein, a two‐pronged strategy is proposed to enhance the redox reversibility of lattice oxygen and suppress oxygen release from LiNi 0.84 Co 0.08 Mn 0.08 O 2 (NCM) during cycling. Combining a Ce‐based pyrochlore coating that possesses a high oxygen storage capacity with bulk Ce doping that modulates the TM─O bonds, the modified NCM cathode exhibits exceptional cycling stability under harsh operating conditions. The assembled CR2032 cells achieved 72.2% capacity retention after 400 cycles at 1 C under a high cutoff voltage of 4.50 V at 60°C. Moreover, pouch‐type full cells exhibit ultra‐stable cycling performance, retaining 91.0% capacity after 1000 cycles at 1 C within 2.75–4.20 V, and 80.2% after 1000 cycles when the upper cutoff voltage is raised to 4.40 V. This work not only provides a feasible two‐pronged modification strategy for layered oxide cathodes but also promotes the development of ultrahigh‐energy‐density rechargeable batteries.
Source: Advanced Materials
DOI: 10.1002/adma.75701
Institutions: Henan University, University of Wollongong
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7236146450
