Mechanical and multi-radiation shielding performance of concrete optimized with activated carbon and silica fume
Year: 2026
Type: article
Abstract: Concrete plays a critical role in nuclear reactors by providing structural support and serving as a primary barrier against ionizing radiation. This study investigates the effects of activated carbon (AC) and silica fume (SF) as partial cement replacements on the fresh properties, mechanical performance, and gamma-ray shielding efficiency of concrete cured for 28 and 56 days. AC was incorporated at 1–6% by cement weight, while SF was used at a fixed dosage of 10%. Slump tests showed reduced workability for all modified mixtures due to the high surface area and water demand of AC and SF. Mechanical testing revealed that compressive strength increased with AC addition up to an optimum range of 2–4%, with further enhancement achieved in hybrid AC–SF mixtures; the highest gains were observed for combinations of AC and SF, while SF alone significantly improved both compressive and splitting tensile strengths. Gamma-ray attenuation was evaluated experimentally (0.1218–1.408 MeV) and validated using both XCOM theoretical data and MCNPX simulations based on Linear Attenuation Coefficient (LAC) and Mass Attenuation Coefficient (MAC), which showed good agreement with experimental data (relative deviation < 7%). Following model validation in the experimental energy range, these simulations were extended up to $$15 MeV$$ to generate theoretical predictions for complex shielding parameters ( $${Z}_{eff}$$ , $${N}_{eff}$$ , $${Z}_{eq}$$ ) and fast neutron removal cross-sections ( $${\Sigma}_{R}$$ ) without requiring additional costly experimental setups. Results indicate that optimized AC–SF mixtures, particularly the 2% AC + 10% SF hybrid, successfully balance structural integrity with superior multi-radiation shielding efficiency. The results demonstrate that optimized AC–SF concrete mixtures can simultaneously enhance mechanical integrity and gamma-ray shielding efficiency, making them promising candidates for structural radiation-shielding applications in nuclear facilities.
Source: Scientific Reports
Authors: Hamada Abd El-Rahman, Mohamed Y. M. Mohsen(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Writing – original draft, Writing – review & editing), M. A. Yousef(Conceptualization, Formal analysis, Investigation, Methodology, Resources, Software, Supervision, Writing – original draft, Writing – review & editing), A. M. Abdelmonem, Wageeh Ramadan, Hamada H. Kora(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Project administration, Software, Supervision), A. Abdelghafar Galahom(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – original draft, Writing – review & editing)
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Keywords: radiation shielding concrete, activated carbon, silica fume, partial cement replacement, gamma-ray attenuation, compressive strength, splitting tensile strength, linear attenuation coefficient, mass attenuation coefficient, effective atomic number, fast neutron removal cross-section, reactor shielding, concrete workability, MCNPX simulation
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7236194329
