Work

Experimental investigation and multi-criteria assessment of drilling in SiO₂-reinforced AZ91 magnesium composite under bio-based and cryogenic cooling conditions

Year: 2026
Type: article
Abstract: Magnesium (Mg) alloys are attractive for biodegradable and lightweight applications, yet drilling-induced surface integrity remains sensitive to machining and cooling conditions. This study investigates the drilling behaviour of a 6 wt% silica (SiO₂) – reinforced AZ91 Mg composite fabricated by ultrasonic-assisted casting. Thirty distinct drilling conditions were evaluated using a structured mixed-level matrix by varying cutting speed (30–110 m/min), feed rate (0.05–0.15 mm/rev), tool type, and cooling/lubrication environment comprising vegetable oil, coconut oil, and liquid nitrogen (LN₂). Thrust force (F z ), torque (M z ), and surface roughness (R a ) were measured and ranked using MEREC–DNMA and LOPCOW–EDAS multi-criteria decision frameworks. Across the investigated matrix, higher cutting speed and feed rate were generally associated with increased F z , M z , and R a ; these trends are interpreted at the level of the complete drilling condition because the design does not independently separate coolant, tool, and interaction effects. Run 1 (30 m/min, 0.05 mm/rev, vegetable oil, HSS) was the best-ranked investigated condition, with F z = 118 N, M z = 0.23 N·m, and R a = 0.13 μm. Targeted macroscopic and SEM-EDS examination of retained Run 1 burr material revealed segmented and serrated morphology, lamellar shear ridges, plastic-flow bands, microcracks, and localized matrix tearing. The analyzed region was Mg-dominant and did not establish SiO₂ particle pull-out. The ranking identifies the best compromise within the tested domain, not a global process optimum. Vegetable and coconut oils remain candidate bio-based lubricants within the investigated domain; superiority over conventional mineral oil cannot be inferred without matched reference experiments.
Language: English
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7236206329
FWCI:
Cites: 41
Cited by:
Related to: 10