Environmental Trade-Offs and Emission Reduction Potential of Steel Slag-Based Geopolymer Foundry Moulds
Year: 2026
Type: article
Abstract: Conventional foundry moulding systems rely on silica sand combined with organic binders or ordinary Portland cement (OPC), generating environmental burdens associated with raw material consumption, hazardous casting emissions and carbon-intensive binder production. This study assesses the environmental potential of black steelmaking slag (BS) as a secondary resource for geopolymer-based foundry moulds, through its use as an alkali-activated binder precursor and an alternative moulding aggregate. The assessment combines controlled casting emission measurements, leaching tests and a comparative cradle-to-gate life cycle assessment (LCA). Casting trials using silica sand as the common aggregate showed substantially lower measured BTEX concentrations for the geopolymer binder than for the furan resin reference, together with lower CO and NOx concentrations than both conventional binder systems. Cr concentrations in the geopolymer leachate were below the analytical reporting limit of 0.5 ppm, compared with 3.66 ppm for raw BS, consistent with restricted Cr release under the investigated conditions. Expressed per 1 m3 of moulding material, LCA indicated GWP reductions of 33.49% and 35.27% for geopolymer Scenarios S and E, respectively, relative to the OPC baseline. These climate benefits were accompanied by higher impacts in the other 10 assessed categories. Contribution analysis identified sodium silicate production and slag processing electricity as priorities for environmental improvement. The findings highlight BS-based geopolymer moulds as promising alternatives for reducing production-stage carbon impacts and selected casting emissions while valorising an industrial by-product. Optimising activator supply and processing requirements offers a targeted pathway to improve their broader environmental performance while addressing the trade-offs identified by the LCA.
Source: Sustainability
DOI: 10.3390/su182211759
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7236217473
