Two-step hydrothermal method for morphology modulation of barium titanate nanofibers for catalytic dye degradation
Year: 2026
Type: preprint
Abstract: In this work, BaTiO3 nanofibers were successfully prepared by a two-step hydrothermal method using TiO2 as the titanium source. In the first step, Na2Ti3O7 was synthesized under strong alkaline conditions. It was then converted into H2Ti3O7 nanofibers by acid exchange. The results show that the temperature in the first hydrothermal step, from 180 to 240 °C, has a significant effect on the precursor morphology. The H2Ti3O7 prepared at 200 °C exhibit the highest aspect ratio and fiber structure. In the second hydrothermal step, this precursor was used as a template. The effects of reaction temperature and time on the morphology and phase were systematically studied. The results show that BaTiO3 nanofibers with the best morphology and uniform structure can be obtained at 210 °C for 85 min. Deviation from this condition leads to damage of the fiber structure and increased particle formation. XRD and Raman results confirm that all samples are tetragonal BaTiO3. The reaction conditions mainly affect the morphology rather than the phase structure. Based on TEM analysis, the formation mechanism is attributed to ion exchange induced by the morphology template of the precursor. This work provides guidance for the optimization of BaTiO3 nanofiber synthesis and improves the understanding of the formation mechanism.
Source: Research Square
Institutions: Shaanxi Normal University, Xi'an University of Technology
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
Awards: G3217832071, G3326656288
OpenAlex ID: W7236219336
