Work

Compatibility of Blended Cements and Spruce Chips: Effect of Al2(SO4)3, CaCl2, Na2SiO3 and NaOH

Year: 2026
Type: article
Abstract: This article presents the results of research focusing on the compatibility of two types of blended cements with spruce chips (SCs), which have high potential use in the industrial production of wood-cement composites (WCCs). The blended cements were produced by modifying Portland cement with finely ground power plant slag (H) and limestone (L). Na2SiO3, Al2(SO4)3·18H2O, CaCl2 and NaOH, in quantities ranging from 0.5 to 6.0%, were used to modulate the hydration reactions and stabilize the properties of the SCs. Firstly, the effect of these chemical modifiers on the properties of the chemically treated SCs themselves (changes in composition, structure and water absorption) was investigated. Subsequently, the temperature development during the hydration of cement pastes and WCCs was evaluated, with the determination of the inhibitory index and the compatibility factor. The results demonstrated that partial replacement of Portland cement with 15% L or H altered the hydration behavior and compatibility of the cement–SC systems, while the effectiveness of the chemical modifiers depended strongly on binder composition. Among the investigated modifiers, CaCl2 resulted in the highest compatibility factor values, reaching 81.2% for Portland cement, 75.4% for H-modified cement, and 71.3% for L-modified cement at the highest investigated dosage. In contrast, the effectiveness of Al2(SO4)3·18H2O was reduced in the H-containing binder. Overall, the results demonstrate that chemical modifiers cannot be selected independently of cement composition when blended binders are used in wood–cement composites.
Source: Materials
Language: English
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7236232520
FWCI:
Cites: 81
Cited by:
Related to: 10