Work

Wire-Embedded Additive Manufactured Self-Sensing Robotic Gripper Jaw

Year: 2026
Type: article
Abstract: In this contribution, we present a wire-embedded additive manufactured self-sensing robotic gripper jaw for coupled force sensing and structural reinforcement in polymer-based structures. The gripper jaw operates within a gripping force range of 0 to 40 N and is fabricated using fused filament fabrication, with constantan wires embedded via an industrial robot. The gripper jaw’s design is based on a multiple-bending-beam structure, similar to a single-point load cell, with four meandering wire segments integrated into each beam. This study explores the sensor design of the gripper jaw, including analytical and simulation modeling, the fabrication process, and the sensor behavior. Comparisons are made with other partially and fully 3D-printed sensitive gripper jaws and force sensors, as well as an aluminum reference sensor. The results demonstrate that the wire-embedded additive manufactured gripper jaw with constantan wires as sensor elements achieves measurement characteristics suitable for the requirements of precise handling of sensitive and fragile components, with a maximum nonlinearity of −0.29% and a creep deviation of 0.91%, both relative to full scale.
Source: Sensors
Language: English
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7236239249
FWCI:
Cites:
Cited by:
Related to: 10