Work

Temperature-processing time-dependent formation of strontium phosphate conversion coatings on mild steel: interfacial control of corrosion protection

Year: 2026
Type: article
Abstract: A strontium phosphate conversion coating was developed on mild steel and its formation mechanism and corrosion behaviour were investigated as a function of bath temperature and processing time. The formation of a compact Sr-P coating on mild steel requires highly acidic conditions (pH = 2.2) and elevated precursor concentration, enabling the development of a α/γ-SrHPO 4 -based conversion coating. Comprehensive structural, elemental, and electrochemical characterization (SEM/EDS, XRD, FTIR, XPS, SIMS, TEM and PD, EIS and accelerated corrosion test in NSS chamber with cataphoretic electro-coating topcoat) revealed that corrosion protection is governed by a hierarchically structured multilayer system consisting of an outer crystalline α/γ-SrHPO 4 -based layer and compact amorphous interfacial phosphate layer. EIS analysis demonstrated that the interfacial layer plays a dominant role in corrosion resistance by acting as primary barrier against charge-transfer processes. The highest corrosion protection was achieved at 75 °C and 20 min, corresponding to balanced nucleation-growth regime leading to a continuous interfacial layer and an outer structure with minimized density of defects. A deviation from these conditions results in either insufficient coating formation or defect generation. The results show that barrier corrosion protection is primarily governed by the integrity of the interfacial layer (whose short-range structure may exhibit similarities to phosphate-based bioactive glasses) rather than the coating thickness or crystallinity, in contrast to conventional zinc phosphating, where corrosion protection is predominantly governed by the crystalline phosphate layer development.
Language: English
Open Access status: gold
Estimated APC paid: $2,350
OpenAlex ID: W7236245939
FWCI:
Cites: 137
Cited by:
Related to: 10