Learning-Augmented Energy Digital Twin of a Flexible Manufacturing Line: Data-Driven Surrogates and a Multi-Layered Grey Wolf Optimizer for Bottleneck-Aware Decision Support
Year: 2026
Type: article
Abstract: Per-station energy metering in Industrial IoT (IIoT) environments makes it possible to instrument flexible production lines, yet turning such measurements into design decisions remains an open problem. This paper presents a learning-augmented energy digital twin of a real flexible manufacturing line (FML) with seven workstations, industrial robots and radio-frequency identification (RFID) traceability producing three product types. The twin combines per-station time and power surrogate models, learned from metered data at four to five operating points through regression with model selection, with a discrete-event simulator derived from the timed Petri-net model of the zero-buffer, re-entrant line. A multi-layered Grey Wolf Optimizer (AGWO), whose second layer calibrates the compute budget, reaches the optimum in all 30 independent runs within a few milliseconds, and its search core is benchmarked against particle swarm optimization (PSO) and a genetic algorithm (GA) on 23 test functions. The computed set-points were implemented on the physical line. The twin quantifies the classical improvement levers: conveyor-speed tuning yields at most 2.7% energy-per-part savings, job-mix sequencing of 0.6%, and buffer installation of 0%, because the bottleneck station is utilized 99.2% of the time. In contrast, a model-based what-if analysis projects that reducing its cycle time by 25–50% would lower the energy per part by 24–48%. The results show that an inexpensive, measurement-grounded twin can exclude unprofitable design directions and target investment where it matters.
Source: AI
DOI: 10.3390/ai7110492
Authors: Marius-Adrian Păun, Eugenia Mincă(Conceptualization, Supervision, Validation, Writing – review & editing), Henri-George Coandă(Supervision, Writing – review & editing), Octavian Gabriel Duca(Supervision, Writing – review & editing), Florin Dragomir(Conceptualization, Writing – review & editing)
Institution: Valahia University of Targoviste
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,930
OpenAlex ID: W7236258345
