Design-to-print relative-density deviation and stage-resolved compressive scaling of material-extrusion-fabricated PLA-CF and PETG-CF sheet-TPMS lattices
Year: 2026
Type: article
Abstract: Material extrusion (MEX) can cause substantial discrepancies between designed and fabricated material fractions in triply periodic minimal surface (TPMS) lattices, complicating comparisons based on nominal geometry. This study compares sheet-diamond and sheet-gyroid lattices fabricated from commercial PLA-CF and PETG-CF across overlapping ranges of as-printed relative density (RD), determined from specimen mass. Sixty-six lattice specimens are compression tested, and six additional 100% infill printed reference specimens are used for material-specific apparent density normalization. The effective modulus, 0.2% offset stress, mean post-yield stress between 20% and 40% strain, volumetric energy absorption up to 50% strain W 50 , and specific energy absorption are evaluated. Fully interacting specimen-level power-law models with HC3-robust inference are used to compare the property levels and RD sensitivity across topology–material systems. The maximum condition-mean positive design-to-print RD deviations reach approximately 38%–40% for the thinnest diamond lattices and 30%–31% for the thinnest gyroid lattices. The gyroid exhibits significantly greater RD sensitivity in terms of modulus, offset stress, and W 50 , whereas a topology difference in post-yield stress scaling is not established. At RD = 0.50, the diamond PLA-CF exceeds the gyroid PLA-CF by 15.2%–21.7% across the modeled responses and significant diamond–gyroid differences within PETG-CFs are limited to post-yield stress and energy absorption. For the investigated commercial feedstock–process systems, PLA-CF exceeds PETG-CF within both topologies by factors of 1.40–2.11. These results demonstrate that MEX-fabricated TPMS lattices should be assessed using the as-printed material fraction and deformation stage, rather than the nominal geometry alone.
Source: Additive Manufacturing Frontiers
Institution: Khulna University of Engineering and Technology
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Funder: Khulna University
OpenAlex ID: W7236279993
