Bio-Derived Sodium Alginate Regulates Hydrogen-Bond-Mediated Hydration in Magnesium-Based Aerogels for Multifunctional Insulation
Year: 2026
Type: article
Abstract: Ice-templating technology has emerged as a low-energy and environmentally friendly approach for fabricating aerogels. In this work, porous magnesium oxysulfate materials were prepared by directional ice templating, and the MgO-MgSO4-H2O molar ratio was varied to examine the influence of composition on pore structure and overall performance. Among five formulations, the 6:1:30 sample showed a hierarchical structure consisting of micron-scale pores and micro-/nano-lamellar architectures, with a density of 0.66 g/cm3, a porosity of 74.54%, a compressive yield stress of 2.92 MPa, a yield strain of 16.46%, and a thermal conductivity of 0.178 W/(m·K). However, freeze-drying reduces the water available for formation of the 5·1·7 magnesium oxysulfate hydrate phase [5Mg(OH)2·MgSO4·7H2O]. To improve the local hydration environment, 1 wt% sodium alginate (SA), relative to MgO mass, was added before directional freezing. The hydroxyl and carboxyl groups of SA can interact with water through hydrogen bonding and thereby alter water retention during freeze-drying. XRD, FTIR, and microstructural characterization are consistent with enhanced formation of the 5·1·7 phase and a more continuous three-dimensional skeleton after SA addition. The SA-modified aerogel maintained an intact structure after 3 d of water immersion and showed a 49.8% increase in compressive yield stress compared with the unmodified 6:1:30 sample.
Source: Materials
DOI: 10.3390/ma19224885
Institution: Nanjing University of Aeronautics and Astronautics
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7236291332
