ARBOK-LiSGra: A Lithium-Sulfur Battery with Sulfur Held in a Graphene-Like TEGA Framework
Year: 2026
Type: preprint
Abstract: The lithium-sulfur pair stores 2,600 Wh/kg in theory, several times more than lithium-ion, and sulfur is a cheap refinery by-product, yet after three decades of work no lithium-sulfur battery has reached mass production. Three properties of sulfur stand in the way: it does not conduct current, it dissolves as polysulfides that shuttle between the electrodes and corrode the lithium anode, and it swells on discharge so that the cathode crumbles. A recent result raised the average voltage from 2.05 to 2.54 V and the charge per gram of sulfur by 58%, but with an ionic-liquid electrolyte at 200-400 USD/kg and a cycle life of about 100 cycles. We describe ARBOK-LiSGra, a concept in which sulfur sits in the pores of thermally expanded graphite ARBOK (TEGA), a graphene-like carbon material with a specific surface of 2,400 m2/g, and the liquid electrolyte is replaced by TEGA. The framework is expected to conduct the current instead of sulfur, to hold polysulfides next to the electrode and to take up the swelling. The cathode contains no cobalt and no nickel. Sulfur is supplied by the ARBOK-SULPHUR module from acid tars and refinery waste. A scenario estimate gives a world effect of about 30 bln USD over service life. No LiSGra cell has been measured.
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7236294597
