Pareto-based screening of modified high-volume fly ash concrete formulations: Strength, environmental and economic trade-offs
Year: 2026
Type: article
Abstract: Modifiers can improve the 28-day strength of high-volume fly ash (HVFA) concrete, but additional materials and processing may offset the environmental and economic benefits of cement replacement. This study assembled a harmonised literature database of 62 formulations, comprising 50 single-modifier HVFA mixtures, seven combined-modifier mixtures and five ordinary Portland cement (OPC) references. A consistent cradle-to-gate environmental and production-cost framework used 1 m³ of concrete as the principal functional unit, supplemented by GWP and cost per unit of 28-day mean cylinder-equivalent compressive strength. The assessment combined strength screening, strength–GWP–cost Pareto analysis, complementary performance-normalised indicators, OPC safeguards across 12 non-GWP categories and TOPSIS ranking under four weighting scenarios. Technical screening at ≥ 32 MPa retained 29 modified formulations, eight of which were principal Pareto-efficient. The leading slag-modified formulation achieved 55.0 MPa at 292.29 kg CO₂-eq/m³ and A$271.19/m³, with lower impacts than OPC50 in all 12 non-GWP categories. The leading silica-fume formulation achieved 60.3 MPa and the lowest strength-normalised GWP and cost, at 5.15 kg CO₂-eq/(m³·MPa) and A$4.86/(m³·MPa). A hydrated-lime formulation recorded the lowest GWP among baseline-eligible formulations, at 221.92 kg CO₂-eq/m³. At the baseline ≥ 32 MPa threshold, the silica-fume formulation led TOPSIS under balanced and strength-priority weighting, whereas the slag-modified formulation led under environmental- and cost-priority weighting. Both retained the leading two positions across all tested strength thresholds and weighting scenarios. The findings support formulation-specific selection according to performance requirements and priorities. Structural suitability and whole-life performance require project-specific design and durability verification.
Authors: Yulin Patrisia(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Validation, Visualization, Writing – original draft), Chamila Gunasekara(Conceptualization, Supervision, Validation, Writing – review & editing), David W. Law(Conceptualization, Supervision, Validation, Writing – review & editing), Sujeeva Setunge(Supervision, Writing – review & editing)
Institutions: University of Palangka Raya, RMIT University
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $4,540
OpenAlex ID: W7236315490
