Influence of cooling route on microstructure, mechanical performance, and erosion resistance of ASTM A537 pressure vessel steel
Year: 2026
Type: article
Abstract: This study investigates the effects of cooling severity on the microstructure, mechanical properties, and solid particle erosion behavior of ASTM A537 pressure-vessel steel. Specimens were austenitized at 900 °C and subjected to air cooling, salt-bath cooling at 300 °C, oil quenching, and water quenching, followed by tempering of the water-quenched condition. The microstructure evolved from ferrite–pearlite (FP) in the air-cooled condition to predominantly bainitic ferrite (BF) with substantial retained austenite (RA) in the salt-bath cooled condition, finer BF with lower RA and a possible minor martensitic contribution in the oil-cooled condition, and predominantly martensitic (M) structure after water quenching. Increasing cooling severity (in the order A537A < A537S < A537O < A537W) increased yield strength, compressive strength and hardness, whereas UTS gains were limited to the water-quenched condition and ductility generally decreased. The water-quenched condition exhibited the highest yield strength (530 MPa), ultimate tensile strength (630 MPa), compressive yield strength (610 MPa), and hardness (431 HV), while the air-cooled condition showed the highest elongation (38%). Notably, the water-quenched condition retained a relatively high elongation of approximately 28% despite its predominantly martensitic structure. Fractographic analysis revealed predominantly ductile dimple rupture in the salt-bath and oil-cooled conditions, whereas the water-quenched condition exhibited a mixed, lath-controlled tearing morphology with localized microvoid coalescence. Solid particle erosion tests at a 45° impact angle, performed on the FP (air-cooled) and martensitic (water-quenched) conditions, showed a strong relationship between hardness and erosion resistance, with the water-quenched condition exhibiting approximately half the mass loss of the FP condition after 15 min. These findings establish a structure–property–erosion relationship for A537 steel and provide a basis for selecting heat-treatment routes, pending further evaluation of toughness and service performance for pressure-vessel applications.
Source: Next Materials
Authors: M.N. Roghanian, Khalil Ranjbar, M. Reihanian
Institution: Shahid Chamran University of Ahvaz
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,280
Awards: G1964209589, G6147058052
OpenAlex ID: W7236318029
