Work

Engineering, Thermodynamic, and Techno-Economic Feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility for Virgin-Grade PTA and MEG Recovery

Year: 2026
Type: preprint
Abstract: REVISION NOTICE (VERSION 2): In the interest of technical rigor and engineering transparency, Version 2 corrects three thermodynamic and chemical-process inconsistencies identified during the post-publication audit of Version 1: (1) in Section 6.2, the cryogenic heavy-fermion compound YbRh2Si2 (which exhibits quantum-critical thermal rectification only below 1 K and is economically unfeasible for industrial vessels) is replaced by standard industrial fluoropolymer (PTFE/PFA) and borosilicate glass-lined reactor interiors equipped with external ASME-compliant half-pipe coil cooling jackets, while Section 6.1 is reformulated strictly in terms of Fourier thermal-barrier resistance; (2) in Section 7.1, the HVAC heat-recovery calculation is corrected to avoid double-counting the 199 kJ/kg latent heat of vaporization of liquid nitrogen (55.28 kW, which is consumed inside the cryogenic pin mill) and instead evaluates the sensible enthalpy recovery of cold nitrogen off-gas warming from -100 C to +20 C (Delta T = 120 K, cp = 1.04 kJ/kg*K), yielding 34.7 kW or 24,960 kWh_th/month; and (3) in Section 7.3, the water mass balance is corrected to reflect that hydrolytic cleavage of 1,000 kg/h of PET into 864.5 kg/h of PTA and 323.0 kg/h of MEG stoichiometrically consumes 187.5 kg/h (187.5 L/h) of water rather than generating 375 L/h as a byproduct; accordingly, the water subsystem is specified as a closed-loop process-slurry filtrate reclamation circuit with a continuous 187.5 L/h demineralized makeup feed. ABSTRACT:Conventional high-temperature pyrolysis (510 C to 730 C) of oxygen-rich polyesters such as Polyethylene Terephthalate (PET) yields large fractions of non-condensable gases (38 to 49 wt%), solid char (up to 40 wt%), and sublimating aromatic acids (terephthalic acid sublimating at 402 C and benzoic acid) that desublimate inside downstream condensers and obstruct piping. This engineering case study evaluates the thermodynamic, stoichiometric, structural, and economic feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility. The process combines liquid-nitrogen cryogenic embrittlement (-100 C operating chamber temperature) and high-speed contra-rotating pin milling (<100 um particle size) with ozone-assisted aqueous slurry depolymerization (<100 C). Per 1,000 kg of PET feedstock (C10H8O4) and 187.5 kg of stoichiometric reaction water, the process recovers 864.5 kg of virgin-grade Purified Terephthalic Acid (PTA, <25 ppm 4-carboxybenzaldehyde) and 323.0 kg of Monoethylene Glycol (MEG), corresponding to a 118.75 wt% monomer mass yield relative to input polymer. The study details the thermal building envelope (150 to 200 mm closed-cell polyisocyanurate panels with 0.85-albedo TiO2 elastomeric roof coatings), dynamic C40/50 concrete foundations with Novolac epoxy chemical protection, IE5 motor (315 A) and NYCWY shielded cabling specifications, sensible N2 off-gas heat recovery (34.7 kW), and regional revenue projections ($1,096.10 USD/t gross monomer value on the US Gulf Coast).
Language: English
Open Access status: green
OpenAlex ID: W7236337275
Cites:
Cited by:
Related to: 10