Friction-Based Stabilization for Sustainable Temporary Urban Installations and Adaptive Land Use
Year: 2026
Type: preprint
Abstract: Exhibition pavilions, pop-up retail units, emergency shelters and event structures make flexible, reversible land use possible, yet the usual way of holding them in place, mechanical anchoring to the floor, damages the host surface, generates waste and adds embodied carbon. This paper develops a friction-based stabilization framework for temporary structures that cannot be anchored. The Frictional Stability Index (FSI), defined as the ratio of base friction capacity to lateral demand, is placed in a design context and extended to a family of indices that account for overturning, amplification of the base shear by a flexible frame, resonance under crowd loading and loss of normal force under vertical floor vibration. A dynamic model of a freestanding booth, combining Coulomb–Stribeck friction, a flexible frame and horizontal and vertical floor motion, is solved in COMSOL Multiphysics for 143 cases and verified against closed-form solutions and the energy balance. Four results stand out: (i) a higher friction coefficient improves stability only until the booth tips rather than slides; (ii) a flexible frame amplifies the base shear by a factor of 1.54 under a 0.6 s floor pulse, so slip begins at a friction coefficient 1.54 times the floor acceleration expressed in g; (iii) slip under crowd loading is confined to a band of roughly ± 5% around the frame frequency; and (iv) creep under a constant lateral load begins once the minimum normal force can no longer carry it, so a static index of 1.5 tolerates vertical floor accelerations up to 0.33 g whereas an index of 1.2 tolerates only 0.17 g. Three exhibition booths analysed as case studies return static indices between 9.5 and 19, and a seismic example shows that the lower-bound design force of ASCE 7–22 can erase the margin of an index of 1.5.
Source: Research Square
Authors: Muhammad Naqash, Antonio Formisano
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7236353530
