Short Expandable-Wing Suture Anchors for Tibial Eminence Avulsion Fracture Fixation: Effects of Solid Versus Additively Manufactured Lattice Wings on Biomechanical Performance and Cytocompatibility
Year: 2026
Type: article
Abstract: Fixation of tibial eminence avulsion fractures (TEAFs) in skeletally immature patients requires adequate mechanical stability within a limited insertion depth to minimize the risk of physeal injury. Conventional transosseous cortical-button fixation (TCBF) requires the creation of tibial bone tunnels, whereas conventional suture anchors may have excessive insertion depths. In our previous study, a short expandable-wing (SEW) suture anchor (9.5 mm in length and 5.5 mm in diameter) with CNC-machined solid wings was developed to enhance fixation strength within a limited bone volume. In the present study, a second-generation SEW anchor was developed by replacing the solid wings with 3D-printed Ti6Al4V lattice wings to provide a potentially more favorable bone–implant interface. The mechanical performance of CNC-SEW and metal additively manufactured SEW (MAM-SEW) anchors was evaluated using polyurethane-block pull-out testing and a porcine TEAF model with single- and double-suture TCBF controls. Cytocompatibility was assessed using an MG-63 direct-contact MTT assay. Pull-out loads were 574.8 ± 10.6 N for CNC-SEW and 501.2 ± 39.2 N for MAM-SEW, compared with 429.0 ± 29.0 N for a historical TWINFIX comparator. After 200 loading cycles in the porcine model, cumulative displacements were 0.9 and 0.7 mm for CNC-SEW and MAM-SEW, respectively, compared with 2.2 and 1.3 mm for single- and double-suture TCBF. The corresponding ultimate failure loads were 278.88 and 292.56 N for the SEW groups, compared with 109.86 and 223.56 N for the TCBF groups. The MAM-SEW group also exhibited higher MG-63 metabolic activity than the CNC-SEW group. These findings demonstrate favorable initial fixation performance and preliminary cytocompatibility of the lattice-wing SEW anchor, supporting its potential application in TEAF fixation. Further studies are required to evaluate long-term osseointegration and physeal safety.
DOI: 10.3390/jfb17110584
Authors: Chia-Hung Tsai(Conceptualization, Validation, Writing – original draft), Hsu-Wei Lin(Investigation, Methodology), Hsuan-Wen Wang(Data curation, Investigation, Methodology), Yen Cheng(Data curation, Formal analysis), Chiao-Min Chang(Investigation), Rong-Chen Lin(Software), Chun-Li Lin(Conceptualization, Funding acquisition, Writing – original draft, Writing – review & editing)
Language: English
Subfield: Orthopedics and Sports Medicine
Field: Medicine
Domain: Health Sciences
Open Access status: gold
Estimated APC paid: $3,258
OpenAlex ID: W7236401313
