Work

Experimental investigation of cyclic steam stimulation using dual perforation

Year: 2026
Type: preprint
Abstract: Cyclic steam stimulation has been widely used to recover heavy oil reservoirs. The process is done by injecting steam into the well, then it is soaked in the reservoir for several days, and after that, the well is produced. This process can be repeated so that the oil saturation around the well is no longer economical to produce. The more cycles, the steam oil ratio increases. Therefore, the process needs a lot of steam to recover heavy oil reservoirs. To maximize the steam effectiveness, the injected steam is to be evenly distributed in the reservoir. To support a wider distribution of steam, two perforations are made in the interval of formation. The first perforation is at the top of the formation as an injection perforation, and the second perforation is at the bottom of the interval perforation as a production perforation. To make this phenomenon observable, an artificial reservoir is made on a laboratory scale. Furthermore, the dual perforation was carried out by adding solvent after half the injection time period. The results showed that dual perforation is more efficient compared to single perforation with a cumulative oil production increase of 45.9% by lowering CSOR by 31%.
Language: English
Subfield: Fuel Technology
Field: Energy
Open Access status: green
OpenAlex ID: W7236439633
Cites: 10
Cited by:
Related to: 10