Work

Assessment of the calibration capability of KRISS for noble-metal thermocouples

Year: 2026
Type: article
Abstract: The Korea Research Institute of Standards and Science (KRISS) maintains the national temperature standards and provides high-accuracy calibration services exclusively for noble-metal thermocouples (Types R, S and B). Most industrial users prefer comparison calibration to primary fixed-point calibration because the latter is time-consuming and costly. Comparison calibrations, however, carry larger uncertainties, and values above 1100 °C must be obtained by extrapolation, which further increases the uncertainty. To establish the reliability of this practical approach, a comprehensive assessment of KRISS’s thermocouple calibration capability was undertaken. Three Type R reference thermocouples were prepared, characterized for thermoelectric inhomogeneity, and calibrated at the ITS-90 fixed points (Sn, Zn, Al, Ag, Cu), and Pd melting point realized by the KRISS cell together with selected metal–carbon eutectic points (Fe–C, Co–C and Pd–C) up to 1560 °C. The same thermocouples were then mutually intercompared in a fully automated comparison system up to 1100 °C, after which the deviation functions were extrapolated to 1600 °C. Temperature differences between the extrapolated comparison results and the independent fixed-point calibrations remained within ±0.3 °C across the entire range—substantially smaller than the expanded uncertainties assigned to routine comparison calibrations (0.8 °C from the ice point to 1100 °C and 1.6 °C from 1100 °C to 1600 °C). These results demonstrate that fixed-point-calibrated reference thermocouples can be used for routine comparison calibrations limited to 1100 °C with subsequent extrapolation to 1600 °C, while remaining fully consistent with the primary temperature scale. The combination of primary fixed-point realization, mutual inter-comparison, and validated extrapolation therefore provides a practical and fully traceable foundation for KRISS’s thermocouple calibration services.
Source: Metrologia
Language: English
Open Access status: hybrid
Estimated APC paid: $3,325
OpenAlex ID: W7236500090
FWCI:
Cites: 16
Cited by:
Related to: 10