Work

Mango (Mangifera indica L.) Leaf Powder and Its Activated Carbon for Direct Black 168 Dye Removal: A Comparative Adsorption Study

Year: 2026
Type: article
Abstract: The discharge of dye‑laden effluents from tannery industries represents a major environmental challenge due to their persistence, toxicity, and resistance to biodegradation. Developing low‑cost, sustainable adsorbents is therefore critical for effective wastewater treatment. This study comparatively evaluated the adsorption performance of mango leaf powder (MLP) and mango leaf-derived activated carbon (ML-AC) for the removal of Direct Black 168 dye from aqueous solutions. Batch adsorption experiments were conducted to investigate the effects of solution pH, adsorbent dosage, initial dye concentration, and contact time. Maximum dye removal was achieved at pH 2 for both adsorbents, with optimum adsorbent dosages of 0.75 g for MLP and 0.35 g for ML-AC, while equilibrium was attained after 120 min and 80 min, respectively. Under these optimized adsorption conditions, MLP and ML-AC achieved dye removal efficiencies of 75.66% and 78.34%, corresponding to experimental equilibrium adsorption capacities (qe) of 10.09 mg/g and 22.38 mg/g, respectively at an initial dye concentration of 100 mg/L. The equilibrium data were best described by the Freundlich isotherm, indicating multilayer adsorption on heterogeneous surfaces. The adsorption kinetics were best fitted by the pseudo-second-order model, suggesting that chemisorption may have contributed to the adsorption process. The study demonstrates that both mango leaf powder and mango leaf-derived activated carbon are potential sustainable adsorbents for the removal of Direct Black 168 from aqueous solution, with phosphoric acid activation improving the adsorption performance of the mango leaf powder under the investigated conditions
Language: English
Open Access status: diamond
OpenAlex ID: W7236515219
FWCI:
Cites:
Cited by:
Related to: 10