Evaluation of key parameters affecting gasifier roof subsidence under thermal damage conditions
Year: 2026
Type: article
Abstract: Aiming at investigating the gasifier roof subsidence and variations with the related parameters under thermal damage conditions (TDC), this study established the fixed beam model of the rock beam (RB) and constructed the propagation equation of the temperature field in the rock under TDC. Using static equilibrium theory, the differential equation of the deflection curve of the RB was derived and solved to obtain the RB deflection under particular thermal damage conditions. The time-dependent variations in bending moment, deflection, position of the neutral layer, thermal flexural rigidity, and limit span of the RB were compared and examined in depth. The results show that when the elastic modulus dropped with increasing temperature, compared with the values at normal temperature, the deformation of the RB under TDC was greater, the maximum positive bending moment was smaller, and the maximum negative bending moment was greater. The position of the neutral layer first rose and then dropped slowly but was always located above the neutral layer at normal temperature. Thermal flexural rigidity determined the RB’s deformation and the bending moment’s distribution. A larger thermal flexural rigidity indicated smaller subsidence of the key stratum and vice versa. The limit span in the middle of the RB was subjected to the combined effect of the bending moment and the position of the neutral layer. Compared with the measured surface subsidence curves in the Huating Underground Gasification Project, the deflection curves under TDC conditions were more consistent with the actual conditions than those under thermal-mechanical coupling conditions (TMC) regarding the variation characteristics. Based on the calculated results, the maximum surface subsidence of the project was approximately 65 mm.
Source: Scientific Reports
Authors: Wang Jianhua, Xin Lin, Ma Jun, Wang Huan
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7236586139
