Thermal Homogenization of Hot Mix Asphalt Agglomerates by Remixing in a Material Transfer Vehicle: A Transient Heat-Conduction Analysis
Year: 2026
Type: article
Abstract: This study analyzes how remixing in a Material Transfer Vehicle (MTV) reduces thermal segregation of hot mix asphalt (HMA): after remixing, colder agglomerates surrounded by hotter HMA equalize by heat conduction. Transient conduction in cubic agglomerates of 2, 3, and 4 cm was modeled with a finite-conductivity model and a lumped-capacitance-type model, both at a Biot number of 0.5. The calculation was verified by oven-heating tests on two 4 cm cubic AC 8 S 50/70 specimens at the same Biot number: the finite-conductivity model reproduced the measured center temperature with a root-mean-square error of 2.0 °C, whereas the lumped model overpredicted it by 12.8 °C. The time to eliminate 90% of the initial temperature difference is 12, 28, and 50 min for 2, 3, and 4 cm agglomerates; a three-dimensional numerical analysis shows that perfect contact shortens these times by 1.5–2 times and that a cold-material fraction of 9–16% reduces the local temperature difference after 10–20 min by a further 10–50%. Equalization of 2 cm agglomerates within about 10 min is comparable with the estimated 5–20 min residence time in an MTV, whereas 4 cm agglomerates retain about 40% of it after 20 min. These conditional model results require field verification.
Source: Materials
DOI: 10.3390/ma19224910
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7236588520
