Work

Silicon Microthermocycler for Point-of-Care Analytical Systems: Electro-Thermal Characterization and Optimization for Rapid PCR Amplification

Year: 2026
Type: article
Abstract: A sub-microliter silicon microthermocycler platform for rapid point-of-care PCR analytical systems is proposed. To suppress reaction microchamber enzyme adsorption while preserving master mix stoichiometry and amplicon purity, a 24-h bovine serum albumin pre-passivation protocol on developed PDMS–glass microchambers was employed. The system relies on an advanced electro-thermal architecture; it combines a low thermal mass four-tether titanium-on-silicon microheater (Cheater ≈ 8 mJ/K) with an STM32 discrete PID controller and a MAX4211 constant-power regulator. This setup was systematically validated across steady-state plateaus and phase hold time compressions. Thermal characterization revealed a heating rate of 175 °C/s and a cooling rate of 12.5 °C/s (τloaded = 4.04 s). Furthermore, the system maintained sub-degree temperature stability across extended 40-cycle runs (ΔTdrift = +0.001 °C). Optimization of phase thermal parameters (96 °C denaturation, 60 °C annealing, 72 °C extension) and hold times (10 s denaturation, 5 s annealing, 2.5 s extension) enabled successful amplification of a 102-base-pair target within 12 min, achieving 65% runtime reduction compared to conventional benchtop thermocyclers. Lacking real-time fluorescence detection, the prototype currently relies on off-chip secondary qPCR quantification.
Language: English
Open Access status: gold
Estimated APC paid: $2,534
OpenAlex ID: W7236626043
FWCI:
Cites: 31
Cited by:
Related to: 10