Response Surface Modelling and Optimization of Pineapple Leaf Fiber Reinforced Epoxy Composites Using Fiber Length and Loading
Year: 2026
Type: preprint
Abstract: The demand for sustainable materials has started to draw the attention of engineers and researchers toward natural fiber composites. Pineapple fruit crop is a ratoon crop, and pineapple leaves are generated as an agricultural residue during cultivation and harvesting. The fiber generated from this residue pineapple leaves become an alternative for the managing this crop waste and to generate ecofriendly product. The present study includes the composite specimen fabrication of total 40 experimental framework using different combination pineapple fiber length (FL) and fiber content (FC) as a reinforcing elements and epoxy polymer as a reinforcement constituent. Further these specimens are experimentally evaluated using the ASTM standards to find out mechanical response in terms of tensile strength (TS), flexural strength (FS) and impact strength (IS) properties. The mechanical response of PLAF reinforced polymer composite depends upon the material variables such as FL and FC. The present research proposes a quadratic response surface-based regression model which is fitted to 40 runs for 5 x 8 full factorial data sets, for predicting multi-response optimization of the material variables. This research also includes determination of the statistical adequacy of the proposed model and surface and interaction analysis of the material variables. The quadratic response surface-based regression model predicted compromise region at a fiber length of 22.6 mm and fiber proportion of 31.3 wt% with predicted mechanical response of tensile, flexural and impact strength of 48.91 MPa, 72.72 MPa and 6.51 kJ/m² respectively. In comparision experimental analysis represents that composite sample PF 29 with FL of 20 and FC of 30 wt% exhibits highest values of TS, FS and IS of 56.75 MPa, 87.85 MPa and 7.84 kJ/m², respectively. The developed quadratic response surface-based regression model exhibited coefficients of determination (R²) for TS, FS and IS of 0.8869, 0.8816 and 0.8571 respectively, with corresponding adjusted R² values of 0.8703, 0.8642 and 0.8360. The extremely low p-values (p< 0.05) of 3.997 × 10⁻¹⁵, 8.549 × 10⁻¹⁵ and 2.048 × 10⁻¹³ for tensile, flexural and impact performance respectively show that quadratic regression models are statistically significant.
Source: Research Square
Language: English
Subfield: Polymers and Plastics
Field: Materials Science
Domain: Physical Sciences
Keywords: pineapple leaf fiber, natural fiber composites, epoxy composites, fiber length, fiber content, tensile strength, flexural strength, impact strength, agricultural waste utilization, multi-response optimization, quadratic response surface, full factorial design, eco-friendly materials, sustainable materials, mechanical properties of composites
Open Access status: green
OpenAlex ID: W7236648153
