Effect of Low Temperatures and Drilled Hole Diameters on Flexural Properties and Failure Mechanisms of 3D Angle‐Interlock Woven Drilled Hole Composites
Year: 2026
Type: article
Abstract: This study systematically investigates the flexural behavior of three‐dimensional angle‐interlock woven drilled‐hole composites (3DAWDHC) under low‐temperature conditions. Three 3DAWDHC architectures, namely through‐angle interlocking (TI), shallow‐cross bending (SB), and shallow‐cross straight (SS), were fabricated and subjected to three‐point bending tests over a temperature range of −60°C to 20°C and drilled hole diameters of 0–6 mm. The effects of temperature and hole diameter on peak load, flexural strength, and flexural modulus were quantitatively evaluated. The results demonstrate that both temperature and hole diameter significantly regulate the flexural properties of 3DAWDHC in opposite manners. Taking the TI structure as a representative, flexural strength and flexural modulus increase by 14.6% and 44.0%, respectively, when temperature decreases from 20°C to −60°C, relative to the room‐temperature non‐drilled baseline. By contrast, when the drilled hole diameter increases from 0 to 6 mm at 20°C, flexural strength and flexural modulus decrease by 22.8% and 28.9%, respectively. Regarding failure characteristics, lower temperatures aggravate matrix embrittlement and induce more severe brittle fracture, while larger drilled holes reduce the macroscopic failure area but deepen crack propagation along the thickness direction. These findings provide fundamental data and design guidance for 3D woven joint structures serving in cryogenic aerospace environments.
Source: Polymer Composites
DOI: 10.1002/pc.71895
Authors: Yi Ren(Formal analysis, Investigation, Methodology, Writing – original draft), Xiaonan Wang(Formal analysis, Investigation, Methodology, Writing – original draft), Ying Chai(Formal analysis, Investigation, Methodology), Yiwei Ouyang(Formal analysis, Investigation, Writing – review & editing), Yiran Han(Formal analysis, Investigation, Methodology), Xin Sun(Formal analysis, Investigation, Methodology), Xiaoke Huang(Formal analysis, Investigation, Methodology), Duyan Zhang(Formal analysis, Investigation, Methodology), Yang Liu(Writing – review & editing), Xiaozhou Gong(Formal analysis, Investigation, Writing – review & editing)
Institution: Wuhan Textile University
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
Award: G8383886461
OpenAlex ID: W7236660937
