Work

Towards an Automated Waste-Sorting System: Computer Vision and Neural-Network Inverse Kinematics for a 5-DOF Arm

Year: 2026
Type: article
Abstract: Automated waste sorting with a robotic manipulator requires two capabilities that belong to different fields: recognizing and localizing the object in the image, and converting a target Cartesian position into joint angles. This paper reports the construction and separate evaluation of both modules for a 5-DOF manipulator, and verifies the inverse-kinematics module on a continuous trajectory. For the recognition module a dedicated dataset, EPU_waste, of 2,955 images and 4,068 annotated instances in three classes was built, and two instance-segmentation models, YOLOv8s-seg and YOLO11s-seg, were trained and compared on it. YOLOv8s-seg reaches a recall of 0.97 against 0.88 and runs at 56.5 frames per second on a Quadro RTX 3000 GPU, and was therefore selected. For the inverse-kinematics module a 7–15–15–4 feedforward network with 424 weights was trained by the Levenberg–Marquardt algorithm over ten independent runs, giving a joint angle error of 2.2164 ± 0.1811° and a position error of 9.96 mm. On a continuous circular trajectory, the network gives a position RMS error of 3.461 mm with a standard deviation of only 1.30 mm, so the error is largely a near-constant systematic offset.
Language: English
Open Access status: green
OpenAlex ID: W7236676851
FWCI:
Cites:
Cited by:
Related to: 10