Work

Fabrication and characterization of basalt-jute fiber reinforced epoxy hybrid composites filled with Al2O3 and MgO nanofillers

Year: 2026
Type: article
Abstract: Optimizing nanofiller composition is crucial for enhancing the mechanical performance and moisture resistance of epoxy hybrid composites. In this study, the effect of nano-fillers ( Al 2 O 3 , MgO) on the physio-mechanical and microstructural properties of basalt-jute fiber-reinforced epoxy hybrid composites was investigated. Composite samples were fabricated using the hand lay-up technique, and mechanical, water absorption, and SEM tests were performed according to several ASTM standards. Three composite samples were fabricated for each nano-filler individually and in combination by varying the nano-particle content (2, 4, and 6 wt%) of the nano-particles. The results revealed that 2% MgO provided the best moisture resistance with considerably much lower uptake of 3.22% at the end of 7 days compared to the unfilled composite. Impact and flexural strength increased with the incorporation of MgO nanoparticles, and for 6% MgO, impact and flexural strength increased by 63.45% and 42.69% compared to the base, respectively. The composite containing 2 wt% Al₂O₃ achieved the highest tensile strength of 160.525 MPa, representing a 65.84% improvement. Morphological analysis was performed on the specimens after the tensile test to evaluate fracture behavior, interference of fibers with the matrix, and fiber pull-out of the specimens. The results of this research suggest that M-2, M-6, and A-2 are suitable for applications like automobile, aerospace, and other engineering fields where high resistance to moisture, high impact and flexural strength, and high tensile strength-to-weight ratio are essential.
Language: English
Open Access status: hybrid
Estimated APC paid: $2,830
OpenAlex ID: W7236686034
FWCI:
Cites: 67
Cited by:
Related to: 10